Short answer: choose switchable smart glass when glass is being supplied new (new builds, new partitions, glass replacement, facades). Choose smart film when the glass is already in place and you want privacy without replacing it. Both use the same PDLC (polymer dispersed liquid crystal) technology, switch from frosted to clear in under 0.2 seconds, and block 99% of UV.
How they differ
Smart glass is a PDLC layer laminated between two panes of glass at the factory. It arrives as a finished glass unit, cut to size, ready for your glazier to fit like any other laminated glass.
Smart film is the same PDLC layer supplied as a self-adhesive film. It is applied to the inside face of existing glass, turning a standard window, partition or door into switchable privacy glass.
| Halo Smart Glass | Halo Smart Film | |
|---|---|---|
| Build | PDLC laminated between two panes | Self-adhesive PDLC film on existing glass |
| Best for | New builds, partitions, facades, glass replacement | Renovations, occupied buildings, retrofit privacy |
| Switching time | Under 0.2 s | Under 0.2 s |
| UV / IR blocking | 99% / 98% | 99% / 98% |
| Configurations | Laminated 4+4 to 12+12 mm, insulated glass units (6–20 mm spacer), curved or flat | Cut to each pane, applied to the inside face |
| Disruption on site | Glass is replaced or installed new | Existing glass stays in place |
| Power | Low voltage AC through a transformer; under 0.5 W per sq ft when clear, 0 W when frosted | |
When smart glass is the better choice
- The glass is being specified new anyway, so laminating the PDLC layer in costs no extra trades.
- You need an insulated glass unit, a curved pane or a specific laminate build for safety or acoustics.
- The glass is exposed to cleaning, humidity or handling where a protected, laminated layer is preferable (bathrooms, wet areas, high-traffic partitions).
When smart film is the better choice
- The building is occupied, or replacing glass would mean permits, downtime or strip-out.
- Heritage or facade rules restrict changes to existing glazing.
- You want to upgrade many existing partitions or windows quickly.
What stays the same
Both products are frosted when unpowered and clear when switched on, so the default state is private. Both work with the same controls: remote, wall switch, smart-home and voice systems, motion sensors and timers. Both can double as a rear-projection screen when frosted, and both can carry a logo or custom design built into the switchable layer.
Frequently asked questions
Is smart film as good as smart glass?
Optically and electrically they perform the same, because both use the same PDLC layer. The difference is construction: smart glass is laminated and sealed between two panes, while smart film is applied to the surface of existing glass.
Is smart glass frosted when the power is off?
Yes. PDLC smart glass and smart film are frosted (private) when unpowered and turn clear when voltage is applied.
Can smart film go on any glass?
Smart film is applied to the inside face of flat, clean glass and cut to each pane. Halo reviews the glass type, size and condition from your drawings or photos before supplying film.
Which is better for a new office fit-out?
If the partitions are being supplied new, switchable smart glass is usually the cleaner choice. If existing partitions are staying, smart film converts them without replacing the glass.
Planning a project? Send your drawings to sales@halosmartglass.com or request an estimate. Halo prices every project to its drawings and specification.